|
|
Posted 2013-9-13 15:23:19 Author: sagittarius
The bugs in single mode are debugged.
Display of AUTO “operate” and “stop”
Display of triggering mode
Real-time display of two measurement values
Firmware
This firmware is modified on the basis of Mater Yijian’s version.
1. New interface. Smaller font. No major change of basic operation. Choices on the top line are moved to the right. The cursor choices can still be shifted by the triangle button.
2. Display of 11 measurement values
3. Screenshot can be made by long pressing the square button
[blockquote]
I’m a newbie. My firmware is imperfect. If you guys detect any bugs, please inform me. I’ll try my best to make it better.
C07 code download see the 7# comment
Version C06:
Removal of the bug of recapturing waveform unchanged when the time base is changed
The firmware covers the size of two apps:
C06.rar
(92.14 KB, 下载次数: 6113)
(90.82 KB, Downloads: 193)
C05:
Saving trig mode and storage depth
New color pattern of the interface
The firmware covers the size of two apps:
C05.rar
(92.03 KB, 下载次数: 5147)
(90.82 KB, Downloads : 139)
C04:
Referenced after Wangluoguke’s version
Removal of the bug that when T2 is to the left of T1, the Triangle T data can not be displayed.
Removal of the bug that the difference value between T1 and T2 does not appear when it is larger than 2.14s.
Impact wave output Pul (simulating human heart pulsation cycle) is added to the signal generator.
Removal of the bug that choices on the right are directly made by the ITEM wheel cycle.
The firmware covers the size of two apps:
C04.rar
(91.84 KB, 下载次数: 5081)
(89.84 KB, Downloads : 128)
C03:
Small bugs are fixed such as saving the bottom items on the right and hiding the 2nd choice of CH3 and CH4.
The firmware covers the size of two apps:
C03.rar
(90.57 KB, 下载次数: 5002)
(88.87 KB, Downloads : 127)
Firmware source code compressed package 1:
C03_code.part01.rar
(1.91 MB, 下载次数: 5455)
(1.86 MB, Downloads : 210)
Package 2:
C03_code.part02.rar
(1.69 MB, 下载次数: 5037)
(1.66 MB, Downloads : 211)
(The source code needs both packages to be uncompressed)
My program modification might be messy. Hope you guys could shed some lights for its improvement.
C02:
Compatible with 2M and 8M Flash. 8M Flash is not subject to the SYS versions. This firmware applies for SYS bottom of all versions.
APP1: installed at APP1’s position. Covering the size of two apps:
APP1_C02.rar
(45.68 KB, 下载次数: 6906)
(44.92 KB, Downloads : 106)
APP3: installed at APP1’s position. Covering the size of two apps:
APP3_C02.rar
(45.68 KB, 下载次数: 6968)
(44.92 KB, Downloads : 101)
C01:
I use 2M Flash DS203. This firmware applies for SYS bottom of all versions.
8M Flash DS203 must install SYS_1.50 before it uses this firmware to reinstall system.
This firmware covers the size of 2 apps. So I divided it into both the position of App1 and App3.
APP1: installed at APP1’s position. Covering the size of two apps:
APP1_C01.rar
(48.41 KB, 下载次数: 6791)
(47.85 KB, Downloads : 107)
APP3: installed at APP3’s position. Covering the size of two apps:
APP3_C01.rar
(48.4 KB, 下载次数: 6921)
(47.85 KB, Downloads : 100)
APP3_C02(1).rar
(45.33 KB, 下载次数: 7016)
44.92 KB, Downloads : 108
|
|
发表于 2014-8-26 15:55:02
发表于 2015-1-29 16:27:14