- 加入蓝牙，可连接MINIWARE手机APP
- 加入CP50锡炉温度曲线和PID温控

固件更新方法：
1.长按MHP50控制端A键，用USB Type-C数据线将MHP50与电脑连接，进入DFU模式，屏幕显示“DFU Mode V1.00”，电脑将出现“MHP50_DFU”的虚拟磁盘。
2.将文件“MHP50APPxxx_Part1.hex”拷贝进入DFU磁盘，等待磁盘重启后“hex”文件后缀名变为“rdy”,再将文件“MHP50APPxxx_Part2.hex”拷贝进入DFU磁盘，等待磁盘重启后“hex”文件后缀名变为“rdy”。然后将“MHP50UIxxx.hex”拷贝进入DFU磁盘，再次等待磁盘重启后“hex”文件后缀名变为“rdy”，断开USB连接，完成固件升级。

- With Bluetooth enabled, it can connect to the MINIWARE mobile app
- Incorporate CP50 solder pot temperature curve and PID temperature control

Firmware update method:
1. Press and hold the A button on the MHP50 console, connect the MHP50 to the computer with a USB Type-C data cable, enter DFU mode, the screen displays "DFU Mode V1.00", and a virtual disk "MHP50_DFU" will appear on the computer.
2. Copy the file "MHP50APPxxx_Part1.hex" into the DFU disk, wait for the disk to restart, and then the file extension of the "hex" file will change to "rdy". Copy the file "MHP50APPxxx_Part2.hex" into the DFU disk again, wait for the disk to restart, and then the file extension of the "hex" file will change to "rdy". Then copy the file "MHP50UIxxx.hex" into the DFU disk, wait for the disk to restart again, and then the file extension of the "hex" file will change to "rdy". Disconnect the USB connection to complete the firmware upgrade.