
סM01AͬʱʹMicro-USB߽M01ӣԽΪDFU Vx_xx_xĿƶ̣׼õ.hex̼ƶ̵ĸĿ¼£̼׺Ϊ.rdyM01ɹ̼

ע⣺
1ǴM01_v1.21İ汾M01_v1.22Ժİ汾ҪûȱļϣȻҪʽỤŰѱļŻU̡
2ǴM01_v1.20İ汾M01_v1.22Ժİ汾ҪʽỤҪԭUļƥߵַ

ͨhexļʹbinļ
1ȰMDP_ADR.ADRŽỤɹԭļMDP_ADR.SETʹļѳЧˣ
2ٰѺ׺ΪbinĹ̼ŽỤɹԭļĺ׺RDYʹɹ

Upgrade method:
Press and hold the A key of M01, and use the Micro-USB data cable to connect M01 to the computer. A removable disk named DFU Vx_xx_x will appear on the computer. Copy the prepared .hex firmware to the root directory of the removable disk. When the firmware extension is changed to .rdy, restart M01 to complete the firmware upgrade.

Note:
1. When upgrading from M01_v1.21 to M01_v1.22 and later versions, the user needs to back up the files to the computer first, then upgrade, format the U disk after the upgrade, and then put the backup files back into the U disk.
2. If you upgrade from M01_v1.20 to M01_v1.22 and later versions, format the U disk after upgrading (you do not need to save the original U disk file), then please re-match the wireless address.

If you cannot upgrade through the hex file, please use the bin file to upgrade:
1) Put MDP_ADR.ADR into the U disk first, and when successful, the original file name becomes MDP_ADR.SET, which means that the file has worked;
2) Put the firmware with the suffix named bin into the USB flash drive. When it succeeds, the suffix of the original file becomes RDY, which means the upgrade is successful.