Material Download For DT71 Mini Digital Tweezers

minidso

2023.02.27：
DT71 Mini Digital Tweezers User Manual V1.3:  http://forum.minidso.com/forumdownload/DT71UserManaulENV1.3.pdf

2022.11.07：
DT71 Calibration V2.0: http://forum.minidso.com/forumdo ... ibration%20V2.0.zip


2022.06.28：
DT71 Calibration V1.11: http://forum.minidso.com/forumdo ... bration%20V1.11.zip

2022.03.04：
DT71 Firmware V1.15： http://forum.minidso.com/forumdownload/DT71APP115.zip
         - Fixed the problem of detecting the continuous pressing of capacitive buttons

2021.12.01：
DT71 Mini Digital Tweezers User Manual V1.2： http://forum.minidso.com/forumdo ... aul%20EN%20V1.2.pdf

2021.11.08：
DT71 Firmware V1.13： http://forum.minidso.com/forumdownload/DT71APP113.zip
         - Added judging DFU version number
         - Modified some automatic calibration parameter ranges
         - Improve some capacitance calculation methods
         - Perfect compatibility with older versions of DFU
         - Fixed screen flipping issue
         - Modify the order of automatic calibration gears, put R0 before V0
         - Modify auto-calibration C11 range value
         - Modify NV gear configuration

2021.08.10：
DT71 Mini Digital Tweezers User Manual V1.1： http://forum.minidso.com/forumdo ... aul%20EN%20V1.1.pdf

2020.12.31：
DT71 Firmware V1.08： http://forum.minidso.com/forumdownload/DT71APP108.zip
DT71 Mini Digital Tweezers User Manual V1.08： http://forum.minidso.com/forumdo ... al%20EN%20V1.08.pdf
         - Auto-calibrate capacitor subdivision
         - U disk parameters increase capacitive button touch sensitivity
         - Manually measure the voltage range to increase the floating judgment, and the floating display "---"
         - Modify the version number
         - Modify auto-calibration parameter range
         - NV file PA4 pull down
         - Modify the negative voltage judgment value
         - Modify the voltage value to clear the BUG

2020.11.06:
DT71 Firmware V1.06:  https://www.e-design.com.cn/downloads/DT71APP106.zip
         - Shield debug interface
         - Change the initialization U disk data
         - Changed the configuration sequence when auto-calibration voltage calibration is switched to resistance
         - Added battery display
         - Modify the judgment range of automatic calibration parameters
         - Increase the judgment of the Y-axis angle switch corresponding to the display direction, the angle can be selected by the user: 10~60
         - Correct spelling mistakes in calibration prompt characters
         - During automatic gear detection, if the auxiliary value is less than 0.1, the auxiliary value will not be displayed
         -Fixed the inaccurate display of battery power in different gears
         - When the waveform gear is switched to calibration, the screen characters are not clear

2020.09.04:
DT71 Mini Digital Tweezers User Manual V1.05:  http://forum.minidso.com/forumdo ... al%20EN%20V1.05.pdf
DT71 Calibration Instructions V1.0:  http://forum.minidso.com/forumdownload/DT71%20Calibration.zip

minidso

Kyokisan1 发表于 2020-10-6 18:29
Hi,
Can you advise how I get the latest firmware update please ?
I cannot find it on the MINIWARE we ...

The new firmware will comming soon.

Kyokisan1

Hi,
Can you advise how I get the latest firmware update please ?
I cannot find it on the MINIWARE website.
Kind Regards

Kabron

Hello, I see no charging current, although LED is on but very weak.

laurentq

new firmware now with battery indicator, will there be something else?

laurentq

is it possible for the DT71 to measure the ESR of the capacitors, with a firmware update?

minidso

laurentq 发表于 2020-12-26 07:54
is it possible for the DT71 to measure the ESR of the capacitors, with a firmware update?

This function cannot be achieved through software upgrades

minippu

Please tell me about new features or changes in firmware v1.06.  Is there a manual for v1.06?

minidso

minippu 发表于 2020-12-29 22:44
Please tell me about new features or changes in firmware v1.06.  Is there a manual for v1.06?

We have revised some bugs and added the battery display, the menu operation has not changed

malorkus

Just got my DT71 with 1.05 firmware. I downloaded 1.08 from the top of this page and put DT71APP108.hex onto the flash drive. It changed to DT71APP108.rdy right away. I then unplugged it and plugged it back in, and DT71APP108.rdy was gone.

But when I connect the controller to the test arms, the display still says 1.05. What's wrong?