Material Download For TS80P Soldering Iron

minidso

2024.08.01:
TS80P APP V1.40 : http://forum.minidso.com/forumdownload/TS80PAPPV1.40.zip
-Added Chinese language menu

2021.12.01:
TS80P Soldering Iron User Manual V1.2(RU) :  http://forum.minidso.com/forumdo ... aul%20RU%20V1.2.pdf

2020.08.16:
TS80P Soldering Iron User Manual V1.2 :  http://forum.minidso.com/forumdo ... aul%20EN%20V1.2.pdf

2021.03.26 :
TS80P APP V1.30 : TS80P APP_V1.30.zip (53.66 KB, 下载次数: 4764)

2021-3-26 15:01 上传

点击文件名下载附件

- Adjust the vibration judgment value of LIS2DH12 and SC7A20 sensors
- Enable low-pass filtering for SC7A20 sensor data

2020.09.02 :
TS80P APP V1.27 :   http://forum.minidso.com/forumdownload/TS80P%20APP%20V1.27.zip
- Improve power type detection
- 2020/6/12 Uploading and finishing
- Added compatible MSA301 G-sensor
- 2020/7/31 Uploading and finishing
- Modify the overvoltage protection voltage range, up to 14V
- Fix display resistance code BUG
- 2020/8/11 Uploading and finishing
- Remove temperature calibration function
- Modify U disk parameter comments
- Added compatible SC7A20 accelerometer

2020.06.08 :
TS80P APP V1.23 :   http://forum.minidso.com/forumdownload/TS80P%20APP%20V1.23.zip
- Improve mobile power wake-up function
- Added USB connection computer detection function, there is no wake-up function and PD QC does not apply for voltage when USB is connected to the computer
- Improve FUSB302 initialization function retry
- Fix the voltage display bug in temperature control state (display two V)
- PD power supply, the power of the menu page is not adjustable
- PD power supply, enter the menu page to boost
- Improve the detection of power supply type under temperature control, and add the symbol of DC power supply
- Added optional function of displaying voltage or power in temperature control state
- After entering the sleep mode, the voltage will not drop, and then enter the standby state to reduce the voltage
- Improve some codes of U disk, save data in U disk without getting stuck and restarting
- Working power changed to 1s average power
- Added power bank wake-up function during temperature drop when temperature control and state enter hibernation
- Accelerometer detection is more sensitive
- Improve the wake-up function of mobile power supply, modify the wake-up cycle, the cycle is 5s, and the heating is 30ms
- Improve the wake-up function, and wake up when modifying the menu parameters
- When going to sleep, turn off wakeup
- Fixed inaccurate power detection and resistance detection caused by wake-up function
- In the standby interface, the screen will not be turned off if the temperature is too high
- The modified temporary temperature will not be lost without power off (modifying the working temperature of the menu will clear the temporary temperature)
- Improve QC power identification and QC application voltage
- Modify the character of the mobile power wake-up option and change it to LowCur
- Modify the part code of the mobile power wake-up character missing from the previous version
- Tidy up boost code
- Added application voltage detection and re-application after application fails
- stable temperature display

2020.05.22:
TS80 Soldering Iron User Manual V1.1 :  http://forum.minidso.com/forumdo ... ual%20EN%20V1.1.pdf

hmurik

When will you upload the firmware to the TS80P ???

minidso

Now there is no upgrade version firmware for ts80p

hmurik

Please download the first version of the firmware.

xed

hello I have a problem with updating, after doing everything the instructions instructed,  after reboot the same firmware keeps coming back now i have 1.22 what is wrong?

minidso

xed 发表于 2020-6-13 21:56
hello I have a problem with updating, after doing everything the instructions instructed,  after reb ...

The hex file after reboot, Do the name change to  rdy ?

sarreq

v1.23 keeps coming up .err
DFU v3.50
old firmware v1.22
Windows 10 18363

Also, the flash drive with the settings file doesn't seem to work.  it shows up in File Explorer, but thinks it's empty.

广州市晨熹贸易

sarreq 发表于 2020-8-9 04:37
v1.23 keeps coming up .err
DFU v3.50
old firmware v1.22

Maybe you can try to use another laptop to update it. Thank you!