--- TS80智能烙铁资源下载 ---

rob · 发表于 2018-9-23 08:46:41

I also get the same low power issue have tied the below supplies and tied changing the setting but that just does not save the setting

1.Nitendeo swtich USB C charger
2.Lenova Yoga USB charge
3.Chiniese 45W USB C charger
4.Anker IQ battery bank

I have also tried multiple USB C cables with no luck has any one had this same issues with these iron

minidso · 发表于 2018-9-23 09:34:52

joric 发表于 2018-9-23 08:17
Is it compatible with Weller RT-series tips?

Not compatible with RT tips

minidso · 发表于 2018-9-23 09:36:19

rob 发表于 2018-9-23 08:46
I also get the same low power issue have tied the below supplies and tied changing the setting but t ...

All this power supply is QC3.0?

joric · 发表于 2018-9-24 08:13:35

本帖最后由 joric 于 2018-9-24 08:19 编辑

minidso 发表于 2018-9-23 09:34
Not compatible with RT tips

Thanks! I totally forgot Marco Reps measured it in his video and it doesn't seem to match Weller-RT pinout. Here at 5:50 https://youtu.be/83STpUXHilk?t=350

Houseman · 发表于 2018-9-27 10:11:25

Hi all.
Had the same Low-Vot. issue with certified PowerBank claiming QC3.0
I solved the Blitzwolf PowerBank 15000mA by downloading following firmware of Ralim: https://github.com/Ralim/ts100/files/2409546/TS80.zip

Now I can solder on-the-fly and in the field !!!! The reason I waited for 2 months the release of the TS-80
I hope mini-dso official support will please fix this lack of feature in further official firmware.
Would be a great boost of selling.

Morka · 发表于 2018-12-27 03:54:15

Is there V1.07 app available for download ?

minidso · 发表于 2018-12-27 09:52:00

Morka 发表于 2018-12-27 03:54
Is there V1.07 app available for download ?

Yes , You can download now.

Orange-OSOM · 发表于 2018-12-28 03:21:07

本帖最后由 Orange-OSOM 于 2018-12-28 08:31 编辑

I am getting a .ERR, oposed to the expected .rdy, after firmware update on TS80. can some help me fix this? I followed the instructions in the manual.
solved:
did it again on windows 7 oposed to 10.

Zino77 · 发表于 2019-1-12 05:03:07

Hallo,
I have a little problem with TS80 ....
Received and tested with LowVoltage problems with the fw 1.06.
Updated with the last official 1.07 which solves the problem of minimum power, but I noticed the continuous flash with temperature set at 400 °. How can you solve?

https://youtu.be/y0eR7_IGK_k

Is it a firmware problem? Or did I get a faulty product?
I hope in an answer, thank you!

Thanks

bannervantage · 发表于 2019-8-14 23:26:34

thank you for sharing

		自动登录	找回密码
密码			立即注册

[固件更新] --- TS80智能烙铁资源下载 ---

点评

社区居民

忠实会员