TS100/TS80/TS80P/MHP30 IronOS firmware by Ralim

minidso

GITHUB：https://github.com/Ralim/IronOS/

IronOS - Flexible Soldering iron control Firmware

This repository was formerly known as TS100, it's the same great code. Just with more supported devices

Originally conceived as an alternative firmware for the TS100, this firmware has evolved into a complex soldering iron control firmware.

The firmware implements all of the standard features of a "smart" soldering iron, with lots of little extras and tweaks. I highly recommend reading the installation guide fully when installing on your iron. And after install just explore the settings menu.

For soldering irons that are designed to be powered by "smart" power sources (QC and PD), the firmware supports settings around the negotiated power and voltage. For soldering irons that are designed to be powered by batteries (TS100), settings for a cutoff voltage for battery protection are supported.

There are 25 languages currently supported as of present. When downloading the firmware for your soldering iron take note of the language code in the file name.

This project is considered feature complete for use as a soldering iron, so please suggest any feature improvements you would like!

This firmware does NOT support the USB port while running for changing settings. This is done through the onscreen menu only. Logos are edited using the tool or python script and uploaded in DFU mode.

To get started with this firmware, please jump over to [color=var(--color-text-link)]here

[color=var(--color-text-link)]Key Features

• PID style iron temperature control
• Automatic sleep with selectable sensitivity
• Motion wake support
• All settings exposed in the intuitive menu
• (TS100) Set a voltage lower limit for Lithium batteries so you don't kill your battery pack
• (TS80) Set 18W or 24W settings for your power bank
• (TS80P) Automatically negotiates appropriate PD and falls back to QC mode like TS80
• (Pinecil) Supports all 3 power modes (PD, QC, DC In).
• Improved readability Fonts, supporting multiple languages
• Use hardware features to improve reliability
• Can disable movement detection if desired
• Boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods)
• (TS100/Pinecil) Battery charge level indicator if power source set to a lipo cell count
• (TS80/TS80P/Pinecil) Power bank operating voltage is displayed
• [color=var(--color-text-link)]Custom boot up logo support
• Automatic LCD rotation based on the orientation