Material Download for ES15 Motion Control Electric Screwdriver

minidso

2024.01.05 Update:
ES15 Motion Control Electirc Screwdriver Firmware V 1.10 :  https://forum.minidso.com/forumdownload/ES15APPV110.zip
          -Modify the motor control parameters to make the trigger more sensitive

2023.02.17 Update:
ES15 Motion Control Electirc Screwdriver Firmware V 1.09 :  https://forum.minidso.com/forumdownload/ES15APPV109.zip
          -The safety lock function has been added. After the safety lock is turned on, pressing the side button will not start the motor, so as to prevent false touch

2022.12.21 Update:
ES15 Motion Control Electirc Screwdriver Firmware V 1.08 : https://forum.minidso.com/forumdownload/ES15%20APP%20V108.zip
          -Fixed the problem that the U disk comment was misspelled
          -Fixed the problem that the rotation direction of the screwdriver cannot be saved
          -The drive letter name of the APP will be automatically restored if the setting is modified


2022.07.07 Update:
ES15 Motion Control Electirc Screwdriver User Manual V1.1:   https://forum.minidso.com/forumdo ... aul%20EN%20V1.1.zip
ES15 Motion Control Electirc Screwdriver User Manual Russian Version V1.1:   https://forum.minidso.com/forumdo ... aul%20RU%20V1.1.zip

2022.05.24 Update:
ES15 Motion Control Electirc Screwdriver Firmware V 1.07 : ES15APPV107.zip (52.99 KB, 下载次数: 2261)

2022-5-24 17:02 上传

点击文件名下载附件

        -Fixed the problem that the motor has a chance to shake when running at a low speed in the 1st gear torque
        -Fixed the problem that some machines were misjudged as low battery power when they were turned on
        -Modified the sensitivity gear. When the sensitivity is high (H) in the somatosensory mode, you can start up to the highest speed.
        -Added option to adjust screen brightness
        -When working, the animation of the screw icon on the screen changes with the speed of the screwdriver



2022.03.11 Update:
ES15 Motion Control Electirc Screwdriver Firmware V 1.06 : ES15APPV106.zip (52.98 KB, 下载次数: 1234)

2022-3-11 14:36 上传

点击文件名下载附件

        - Modify the current filter algorithm
        -Fixed the problem that the first gear has two stages of torque
        -Add an identifier for DFU identification to prevent running the wrong APP
        - Added compatibility for DFU different sensors
        - Added error protection, when the APP fails, it can be powered off in time and will not be stuck
        - Ported watchdog protection on to DFU
        -Fixed an issue where motor start would also be triggered in battery management mode
        -Fixed the prompt of wrong U disk hardware ID


2022.02.08 Update:
ES15 Motion Control Electirc Screwdriver Firmware V 1.03 : ES15APPV103.zip (52.31 KB, 下载次数: 996)

2022-2-8 14:48 上传

点击文件名下载附件

        -Update the control logic of torque 1st gear to reduce the occurrence of misjudgments, and at the same time make the torque of 1st gear smaller, more suitable for precision operation
        -Added the function of delaying the LED light off
        -Modify when the screwdriver is calibrated, the voltage is displayed with two decimal places, and the display without calibration is one decimal place (previously displayed no cal)

2022.01.11 Update:
ES15 Motion Control Electirc Screwdriver Firmware V 1.02 : ES15APPV102.zip (50.68 KB, 下载次数: 1002)

2022-1-11 15:36 上传

点击文件名下载附件

        -Fixed the use of DFU flag to judge the rotation direction of the motor
        - Modified when the battery is low when the motor is running, it jumps to the shock mode instead of going directly to the low battery reminder
        - Modified factory calibrated voltage thresholds
        -Increase the torque of the first gear to avoid being misjudged when starting and causing it to fail to start
        -Fixed the problem that some parameters could not be saved correctly
        - Modified the frequency of low battery beeps
        - Removed torque option from settings menu

ES15 Motion Control Electirc Screwdriver Firmware V 1.00 : ES15APPV100.zip (50.62 KB, 下载次数: 1042)

2021-11-25 17:08 上传

点击文件名下载附件

ES15 Motion Control Electirc Screwdriver User Manual V 1.0:   http://forum.minidso.com/forumdo ... 20Manual%20V1.0.zip

Sharpa

Can't access http://forum.minidso.com/forumdownload/ES15APPV110.zip. A new tab opens and then closes. Can't download

minidso

Sharpa 发表于 2024-3-21 22:44
Can't access http://forum.minidso.com/forumdownload/ES15APPV110.zip. A new tab opens and then closes ...

Already fix it.

discip

Today I flashed the ES15S Hex to my ES15. 🤦🏻
Now I can't get into DFU mode.
When I unplug it, the screen doesn't light up.
Is there any way to get it back to a working state?
Please help me.

minidso

discip 发表于 2024-10-24 06:08
Today I flashed the ES15S Hex to my ES15. 🤦🏻
Now I can't get into DFU mode.
When I unplug it, the  ...

Maybe DFU is break.
please send an email to service@morningtools.com We will help you solve it.

satria

Hi, I have a ES15 with DFU 3.52B and the he doesn't respond to the trigger anymore.
So update V1.10 seem to be a good one.
But whatever Firmware I'm installing it changes into .ERR instead of .RDY
help?

minidso

satria 发表于 2024-11-3 16:18
Hi, I have a ES15 with DFU 3.52B and the he doesn't respond to the trigger anymore.
So update V1.10  ...

What OS do you use? Win10 is better.
Can you tre update firmware in Windows? If still update fail, Please send an email to service@morningtools.com, and we will help you solve it.