v2.15-2.17 (20170512)
1ڿģʽµģʽΪǰ汾ֻܵ¶ȣػ棻
2ڴģʽBɸıģʽ(ǰ汾Ϊ¶ȼģʽ)
3ģʽ󵥻A/BɿƶѡҪ޸A/Bѡ޸(ͬʾ¶ȵѹA/BУ׼)ͬʱABشģʽ
4ӻָ豸ܻԭвΪĬֵ˹ģʽFactory Resetѡʱָá
5Ż˿ģʽ¶ý棬¶ʱ˫A,Bѹʾ棬󳤰A,Bɷؿģʽ
6˱ѹķΧ;ȣԾȷ0.1V
7Ӵģʽģʽһ̶Ϊ¶ȵУ͵ѹʾ
8ģʽѡĲʱ˫˳ܣ
9ӵTempStpΪ1ʱ¿ģʽ¶óп޸Ч
10лΪģʽŻ(A/BҲӦģʽ)

V2.15-2.17 update content integration (20170512)

1, in the temperature control mode settings mode changed to the previous version, can only adjust the temperature, after shutdown parameters are not saved;

2. In standby mode, click B to enter the settings mode with changing parameters (previous version is thermometer mode);

3, enter the settings mode, click A/B to control the move around, select the need to modify the item, long press the A/B key to enter the selection of changes (displayed at the same screen temperature
The voltage term is calibrated by A/B, and the A and B keys are returned to standby mode at the same time;

4, increase the restore factory device function, restore all parameters as default values, this function in the set mode Factory Reset option, long press any key to restore
Factory settings.

5, optimize the temperature control mode temperature setting interface, add temperature settings, double-click A, B key into the voltage display interface, enter after long press A, B can return
Temperature control mode;

6, expand the scope and accuracy of protection voltage, can be accurate to 0.1V;

7, after the standby mode enters the set mode, the first item is fixed to the temperature adjustment and voltage display;

8, in setting mode long press any key to enter the selection of parameter adjustment, add double bond, long press the exit function;

9, add, when the TempStp step size is set to 1, the temperature control mode temperature setting is long, according to have the fast modification effect.

10, to switch to left hand mode optimization (A/B key will also correspond to left and right hand mode adjustment);